DC Connectors

Anderson PowerpoleI needed a few wire-to-wire DC connectors for a project. For high-current applications, I use Anderson Powerpole connectors, shown on the right. They many useful features: they can be soldered or crimped, they are genderless (meaning that there are no male and female connectors; any two can be mated), and they can form multi-conductor connectors. They are designed to carry 15A and higher, which is good if the application requires high currents. But for low-power applications, they are too bulky and too expensive (around $1 for a two-wire pair).

The major manufacturers like Samtec and Molex make a wide variety of appropriate connectors, of course, but the selection is almost confusing.

SAMSUNGI eventually settled on RCY connectors from JST. They are small, polarized (really mandatory), and inexpensive. I ordered 50 pairs of mating pigtails on eBay for less than $10. This is around 10% of the cost of Powerpoles. They do have a gender (socket and plug), which is a little less convenient for making various adapters, but I don’t think that there is a genderless alternative.

I think I will use them as standard DC connectors in my projects (at least until I exhaust the 50 pairs I bought 🙂

JST RCY connectors

 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: